Palm Oil Production Line
FFB→Loading→Sterilizing→Threshing→Pressing→Oil Clarifying→CPO→Oil refining→Edible oil. The FFB bunch are transported to plant by truck, after be weighed by weighbridge, the FFB will be loaded down to FFB loading area. FFB will fall down to the FFB loading conveyor through the FFB loading hopper then conveyed to sterilizing station
1.Raw materials reception section
1.1 The FFB bunch are transported to plant by truck, after be weighed by weighbridge, the FFB will be loaded down to FFB loading area.
1.2 FFB will fall down to the FFB loading conveyor through the FFB loading hopper then conveyed to sterilizing station
2. Sterilizing section
The FFB are transported to sterilizer for sterilizing. It use high temperature to soften the fruit and kill the bacteria, this will increase the moisture content of fruit and separte the fruit and separate the fruits easily, so finally it will easy to get oil and separate palm kernel, also avoid the raising of free fatty acid. From picking to sterilizing station, the time shall not over 24 hours.
3. Threshing section
The palm fruit proportion is about 60% of the FFB. In this section, we always use rotating drum thresher to separate palm fruit from the bunches.
The FFB are transported to sterilizer for sterilizing. It use high temperature to soften the fruit and kill the bacteria, this will increase the moisture content of fruit and separte the fruit
4. Pressing Section
Transport the palm fruits to the digester to mix and cook again to separate the palm pulp and nut, the use double screw presser to get crude palm oil, which improve the production efficiencey greatly.
5. Clarification section
The pressed CPO contains some water and other impurities, we need to clarify the CPO into sludge oil and pure oil. The pure oil will be dried then transport to crude oil tank, while the sludge oil will through centrifuge for recovery.
6. Palm kernel recovery section
The pressed palm fiber cake gets into the cake breaker then get into the winnowing system to separate the fiber and nut. Then nut will be crushed to get shell and kernel. Through winnowing and washing system to separate the shell and kernel. The shell ca be used as fuel for boiler, the kernel will be dried for storage.
Professional Advice
Please kindly inform us your required daily capacity, raw material, final product and related data,so that we can make quotation for you according to your requirement. QIE machinery will stand at your point to suggest low cost and suitable production line for you. Sincerely want to cooperate with you.